Best tiny whoop 2021 plus#

You may as well have a very powerful outdoor setup, and a tamer indoor setup which uses smaller propellers.įor 11xx setups, you will be using 2” or smaller propellers. There are other smaller motors you can use for 3 inch propellers like 1105 size motors, but in my experience they don’t really fly that well outdoors and they’re too powerful to fly indoors safely. They have BLHeli_S firmware and support DSHOT, which is a digital protocol for flight controller and ESC communication. If you’re using 3S, then even 10A ESCs will not be an issue.įor 13 setups, use any small ESCs like the RacerStar ESCs from Banggood or LittleBee ESCs by FVT. If you use 4S batteries, though, it’s safe to use ESCs that are at least 20A, because the motors get quite current-hungry on heavy propellers. Both 14 motors will spin 3 inch propellers like a charm, and you can even use them with 4S batteries. That’s why 2” and 1.5” props need motors that are at least 8000kV or higher - otherwise the props just will not provide enough lift.įor a 3 inch propeller setup, 1407 or 1306 motors are ideal. The basic theory of motors is that for larger/heavier(higher pitch) propellers, you need larger motors and l ower kV.įor smaller propellers, you need smaller motors and higher kV. Most if not all micro frames have suggested parts lists with them. The motor you choose to use for your micro build will largely depend on the frame you choose.

Best tiny whoop 2021 plus#

Plus they have a detachable prop guard which you can take off for outdoor flying or leave on for indoor flying. The reason I selected this frame as my frame of choice for 2 inch props is that it’s compatible with both brushed motors and brushless motors. This cute little thing fits in the palm of your hand, and the whole frame weighs just 10 grams. 2 inchesįlex RC Piko X The Piko X frame by Flex RC is tiny, with a motor to motor distance of only 88 mm. If you’re going to get a frame now, check out the Rotor X Atom V3 - it’s tiny and can still be equipped with super powerful motors. 3 inchesįor 3 inch quads, I personally use the Shen Drones Shrieker, but I got the frame a long time ago and it’s still going strong for me, so I have not changed anything. There are either 30.5 x 30.5 mounts (standard flight controller size, found on larger copters as well) or 20 x 20 - which is the new micro standard and is found on new frames.

When shopping for a micro frame, you’ll have to see which size propeller it supports, and how big the flight controller mount is. There are a ton of different frames available, but the coolest micro frames by far (in my opinion) are made by TomoQuads and Flex RC.